Professional 500kg Electric Hydraulic Motorcycle Scissor Lift Table – 110mm Low Profile, 1250mm Max Lift Height
Regular price€199,00
- Clearance Sale – Offer valid until July 20
- In stock, ready to ship
500 kg Load Capacity
Stable platform for heavy motorcycles & e-bikes
Max. 1250 mm Lift
Comfortable working height for service, cleaning & repair
230 V Electric Drive
Simply plug into the socket – lifting & lowering via remote control
Workshop-Ready
With drive-on ramp & wheel clamp for secure positioning
Min. 110 mm Height
Suitable for low-riding machines without bottoming out
Excellent Price/Performance Ratio
Professional lift for maintenance & service – without unnecessary frills
With a minimum height of only 110 mm, this lift is suitable for almost all motorcycles. Even very low-riding machines can be driven onto the platform without any issues and without the motorcycle bottoming out.
It features a powerful electric drive. The drive unit (hydraulic pump) is positioned in front of the lift and is connected to the lift via a hydraulic line.
You can raise and lower the lift using the hand remote control. It also features an emergency stop switch. There is a magnet on the back, allowing it to be easily placed anywhere on the lift.
The drive-on ramp can be hooked into the rear lower end of the lift and removed as desired.
The rear section of the platform (560 mm × 250 mm) can be folded down. When you lower the lift, this rear section automatically folds back in and locks itself. This significantly simplifies wheel assembly.
Technical Data
| Load Capacity | 500 kg |
|---|---|
| Drive | Electric drive 230 V · 50 Hz · 0.75 kW |
| Length of working surface | 2200 mm |
| Width of working surface | 700 mm |
| Max. total height | 1250 mm |
| Min. height | 110 mm |
| Ramp size (L × W) | 510 mm × 550 mm |
| Fold-down section (L × W) | 560 mm × 250 mm |
| Grease nipples | Important bearings equipped with grease nipples |
| Noise level | < 70 dB |
| Required air pressure | 6–8 bar |
| Max. pressure hydraulic pump | 200 bar |
| Hydraulic hose | G 1/4 |
| Surface | High-quality powder coating, black |
Scope of Delivery & Details
With a net weight of 285 kg, nothing can shake this lift.
The high-quality wheel clamp is clamped via two double-acting pneumatic cylinders. Operation for OPEN/CLOSE is handled via a foot switch/rocker on the long side of the lift. The opening width is 215 mm.
The connection terminal for the compressed air supply is located on the lower frame of the lift. Right next to the compressed air inlet is a quick coupling for the compressed air outlet – allowing various pneumatic tools to be operated directly at the lift.
The wheel clamp can be bolted in two positions and adjusted seamlessly in the longitudinal direction over a total of 22 cm. In the final position, this corresponds to a usable platform length of 2350 mm.
⚠ When using the wheel clamp, the motorcycle must always be secured with tension straps. Depending on the rim type, we also recommend using edge protection.
The fully automatic safety lock engages in 8 stages. When lowering, the lock is released via an electromagnetic release mechanism.
The lift can be leveled using 6 leveling screws. The scope of delivery also includes 4 mounting anchors for floor fixation.
The platform is made of checker plate for optimal grip.
⚠ Delivery does not include hydraulic oil – approx. 1.5 liters are required.
The motorcycle is not included in the offer.
The motorcycle is not included in the offer.
Net Weight
285 kg
Shipping Weight
324 kg